Configure video stream. A) HTTP commands get stream only be available under Sub stream. B) Go to Configuration- Video/Audio- Video, set the Stream Type as Sub-stream and Video Encoding as MJPEG. Resolution can be adjusted according to the current condition.
Configure video stream. A) HTTP commands get stream only be available under Sub stream. B) Go to Configuration- Video/Audio- Video, set the Stream Type as Sub-stream and Video Encoding as MJPEG. Resolution can be adjusted according to the current condition.
In this post we're going to show you how you can do video streaming with a Raspberry Pi and a Raspberry Pi Camera – how to stream live video into a web page that you can access in any device that has a browser and is connected to the same network the Pi is. This is useful to apply to a home surveillance camera, for example.
Prerequisites:
- You should already be familiar with the Raspberry Pi board – read Getting Started with Raspberry Pi
- You should have the Raspbian or Raspbian Lite operating system installed in your Raspberry Pi
- You can read this post for an introduction to the Raspberry Pi Camera V2 module
Enable the Rasperry Pi Camera Module
- This article specifically discusses how to do it using network IP cameras and an IP decoder box with HDMI video outputs. Users searching for 'IP camera to HDMI' or 'IP camera to VGA' solutions will be interested in this article. This is how it works. The 4 IP cameras in the above system are all hard wired using Cat-5 network cable to.
- You can use the desktop software (or mobile app) provided by the IP camera manufacturer, or use a web browser to log on to the camera and then view the IP camera's video stream. If you know the IP camera's RTSP URL, you can also connect it directly from VLC Player, a very popular open-source video player. IP camera video streaming is often used for Private Viewing and Public Sharing/Broadcasting.
If you're using the Raspberry Pi Camera Module, you need to enable the camera software in your Raspberry Pi in order to use it. In the Desktop environment, go to the Raspberry Pi Configuration window under the Preferences menu, open the Interfaces tab and enable the Camera as shown in figure below.
Or, in the Terminal window, type the following command:
You should see the Raspberry Pi software configuration tool. Select the Interfacing Options:
Enable the camera and reboot your Pi: How to mirror a video on imovie.
Find the Raspberry Pi IP address
To access your video streaming web server, you need to know your Raspberry Pi IP address. For that, use the following command:
How To Get Video Stream From Ip Camera Software
You'll be given a bunch of information, including your Raspberry Pi IP address. In my case, the RPi IP address is 192.168.1.112.https://tpc.googlesyndication.com/safeframe/1-0-37/html/container.html
Connect the camera
Connecting the Raspberry Pi Camera Module is easy. With the Pi shutdown, connect the camera to the Pi CSI port as shown in the following figure. Make sure the camera is connected in the right orientation with the ribbon blue letters facing up as shown in the next figure.
Writing the script
The script for video streaming is shown below. You can find this script at the official PiCamera package documentation.
Create a new file called rpi_camera_surveillance_system.py:
Copy the following code to your newly created file:
To save your file press Ctrl+X, type Y and Enter.https://tpc.googlesyndication.com/safeframe/1-0-37/html/container.html How use photoshop cc.
Accessing the video streaming
After writing the scrip, you can run it using Python 3. Run the next command:
Once the script is running, you can access your video streaming web server at: http://:8000. Replace with your own Raspberry Pi IP address, in my case http://192.168.1.112:8000.
You can access the video streaming through any device that has a browser and is connected to the same network that your Pi.
You can use your Pi to monitor your home as a surveillance camera: How to use playstation 4 controller on xbox one.
How To Get Video Stream From Ip Cameras
Wrapping up
I hope this project was useful! You could easily upgrade this home surveillance device to record video or notify you when motion is detected.
We also have a project on how to build a complete CCTV system with the Raspberry Pi using MotionEyeOS. Feel free to take a look.
Do you have any questions? Leave a comment down below!
